Do you mean the long 18 inch(?) piece of bead support that is fastened to the
fender with screws? That piece was supplied and attached to the new front fender
beads that I bought from Moss or TRF for my TR3 restoration several years ago!
Don't know what Jaguar uses, too rich for me!!
Jim
Jim Bauder
480-309-9525
'68 TR250 CD47L
Scottsdale, AZ
http://www.triumphowners.com/647
-----Original Message-----
From: triumphs-bounces+jimbpps=cox.net@autox.team.net
[mailto:triumphs-bounces+jimbpps=cox.net@autox.team.net] On Behalf Of
MMoore8425@aol.com
Sent: Monday, September 17, 2007 5:50 PM
To: wquincy@cox.net; triumphs@autox.team.net
Subject: Re: [TR] TR3 fender beading
It sounds like the ones used on the E Type Jaguar. Van you re-use your old long
tabs?
Mike Moore
59 TR3A 41723L(O)
63 S1 E Type
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|