triumphs
[Top] [All Lists]

Re: [TR] TR6 speedometer needle

To: <triumphs@autox.team.net>, <6parts@charter.net>
Subject: Re: [TR] TR6 speedometer needle
From: "Anthony Rhodes" <spamiam@comcast.net>
Date: Sat, 22 Sep 2007 09:41:17 -0400
Wow, I wonder what made it break off?!

The needle is press-fit on the spindle.  BUT, it is sometimes terribly hard 
to get off.  See my repair monograph for general info.

http://mywebpages.comcast.net/rhodes/speedo.html

However, I have had more thoughts since then on getting that darned pointer 
off. Simply holding the "drag cup" and then twisting back and forth on the 
pointer and pulling may actually move the entire spindle in the cup.  The 
cup is also just a press fit on the spindle!  This may not be good as it 
will move the cup toward/away from the magnets in relation to the spindle. 
(I have been re-writing the monograph, but I have bad a hard time finding 
the time!)

So, how do you hold the SPINDLE securely when trying to pull off the 
pointer.  Well, you need to remove the frame, but how do you do that without 
having already removed the face which requires removal of the pointer?

Well, loosening the 2 screws holding the face will allow it to be tipped up 
without actually removing it.  Then you can slide in a knife edge into the 
slots of the screws holding the subframe to the frame to remove it.  Then 
you can separate parts and have access to the spindle.  Then remove the 
pointer and face.  Service the rest of the works while you are there, then 
reattach the subframe to the frame, attach the face, then the pointer, then 
recalibrate the pointer.

-Tony

>Date: Sat, 22 Sep 2007 08:50:50 -0400
>From: "Alan Salvatore" <6parts@charter.net>
>Subject: [TR] TR6 speedometer needle
>To: <triumphs@autox.team.net>, "6pack" <6pack@autox.team.net>
>Message-ID: <004d01c7fd17$34991030$8d86c518@alan>
>Content-Type: text/plain; charset="us-ascii"
>
>I recently had part of the indicator needle on the speedometer break off.
>I have a speedometer for spare parts.  I am hoping I can pull the needle 
>from
>one and put it on the other.  Just not sure how it comes off.
>I just don't want to yank it off and destroy it in the process too.
>Anybody BTDT.
>
>Thanks
>
>Al Salvatore 
_______________________________________________

This list supported in part by the Vintage Triumph Register
http://www.vtr.org

Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

<Prev in Thread] Current Thread [Next in Thread>