Good day to all and many thanks to all that replied to my original post.
I have made a trip out to the garage and here is what I found; now I'm more
confused. The outer casting, the side facing me has "type P" stamped into
it, while the back side has"type PB" stamped into it. I measured the inside
diameter of the mounting hole in question and it measures a tad over 12MM,
or 15/32". Am I right to think that I do indeed have metric calipers,
regardless of the stampings, based on the fact of the 12MM dimension? As
always, many thanks in advance..........Jim McArthur/ CF17672U
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|