I am beginning the process of converting to an alternator and
installing a Dan Masters wiring system. I started by trying to
install the alternator. I cannot get the old belt on the alternator
pulley & I cannot get the old belt off, because the yellow radiator
fan is too close to the radiator - I would guess there is no more
than a 1/2" gap.
My guess is my only choice is to pull off the front end and
radiator. But that sounds like an extremely difficult thing to do
anytime you have to change a belt!!!!
What can I do to avoid this in the future???
I have an electric fan, so maybe I should ditch yellow fan??
Is there someway to mount the fan so it is farther from the
radiator?? I have a picture of the way it is mounted in the middle of
the following page http://members.cox.net/60tr3a/radiator.html
Advice please!!!!
John
John A. Wise
Glendale, AZ
1960 Triumph TR3A
Commission No: TS80422L
http://members.cox.net/60tr3a/
http://www.triumphowners.com/876
1977 Porsche 911S
http://members.cox.net/porsche911s/
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|