-------------- Original message --------------
From: "J.C. Hassall" <jhassall@blacksburg.net>
> Friends,
>
> I have some major league kudos for John Esposito (Quantum Mechanics).
> Seems that when I mated my gearbox to the A-type OD John rebuilt for me,
> I gummed up the pump. I returned the OD to John and asked if he could
> squeeze it in on a rush, since I have about 2 week window to take the
> TR4 for state inspection and put it on the road. John worked on the
> unit after hours, then drove it to the FedEx store the next morning.
> Now **that's** customer service!!
>
> Yahoo! I **really** appreciate his terrific customer service. If you
> have any gearbox or OD work, John's your man. Check him out at
> www.quantumechanics.com
>
> NFI, but sure am one happy customer.
Yes, well, I hate to think of the mess I presented him a few years back with on
my TR3A front calipers. In trying to get the rusted bleed screws out, I
buggered up not one, but two broken off Easy-Outs in one cavity. They accepted
the calipers and rebuilt them as if it were a matter of course. Pretty happy
customer here too. NFI
Terry Smith
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|