As I worked out some neglected details on my '60 TR3A I discovered slop in the
steering wheel. I traced it to the fact that the steering wheel nut did not
contact the hub of my Moto Lita wheel. I had to drill the ID of a large lock
washer to fit the shaft. Once the washer was installed the steering wheel
became as tight as one could wish.
Best regards,
Tom
_________________________________________________________________
Help yourself to FREE treats served up daily at the Messenger Cafi. Stop by
today.
http://www.cafemessenger.com/info/info_sweetstuff2.html?ocid=TXT_TAGLM_OctWLt
agline
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|