I have just switched my oil over to the Valvoline Racing VR1 (TR6) and it
was recommended that I also use a Mr Moly oil additive. Others in my club use
the stuff but I have no experience with it. When I opened the can and pured
it in I noticed that there were "solids" left in a layer in the bottom of the
can (thicker than the liquid). I reduced this with regular oil and poured
that in as well. My question is, does this stuff remain in suspension in the
oil or just settle to the bottom of the sump doing nothing more than reducing
the weight of my wallet?
David Lylis
69 TR6 CC26160L
60 TR3A TS74461LO
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|