Darrell Walker,
There are some excellent grinding tools out there with flutes specialized for
cutting alloy. Not cheap, but you will have that tool for a very long time.
There is also a dressing formula that will not allow any aluminum to build up
in the futes. The combination allows removing material at a prodigious rate.
Regards and good luck with your rebuild.
Joe Alexander </HTML>
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|