Hi Paul,
Looking in the British Victoria TR2/3/4 catalog, theirs does not have the
slots and simply fits between the hold down brackets. If the battery tray
you are watching fits between the brackets,all should be good. I had an
AMCO plastic tray (no slots) in my 1958 TR3A that fit and worked well. The
original drain tube from the battery box down thru the transmission tunnel
was worthless with the tray in place.
Go for it,
Greg Gelhar
1973 TR6
1980 TR8
Osseo, MN .
> Subject: [TR] Spitfire battery tray for a TR3?
>
> I am hoping I hear an immediate response from this inquiry as the auction
ends
> soon:
>
> Will a aftermarket battery tray from a Spitfire correctly fit a TR3? (I
know
> ahead of time that there are usually slits for the TR3's battery-holddown
> brackets that this one will not have.)
>
> Thanks, Paul Dorsey 60 TR3
> _______________________________________________
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|