Yes, actually it does. Well documented in fluid flow studies.
You can generally make a pusher type work well enough. If you are
determined that is the route you wish to take, go for it. You've got a
temperature gauge which will let you know if it's working well enough.
----- Original Message -----
From: <DLylis@aol.com>
To: <tfansher@comcast.net>; <triumphs@autox.team.net>
Sent: Tuesday, October 23, 2007 7:00 AM
Subject: [TR] Push or Pull
>In my opinion that is not accurate as the radiator does not care which side
>the
> blockage (if there is one) is on.
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|