I would use something other than a board for a "perminant" fix. Wood has a
nasty habit of decaying, rotting, molding and other undesirable things.
Joe C.
----- Original Message -----
From: "tom white" <tswhitez123@hotmail.com>
To: <triumphs@autox.team.net>
Sent: Tuesday, October 30, 2007 7:38 AM
Subject: [TR] Comments solicited.
> My driver's door has an elongated depression around the door handle from
being
> closed too hard by the handle. This area has been repaired before and
> reappears. I am thinking I could cut a hole in a 1 x 4 board to go over
the
> inside of the handle and press it against the door skin until it goes
> straight. Then I could screw the ends of the board to the door frame for
a
> permanent fix.
>
> Any comments are appreciated.
>
> Best regards,
> Tom
> _________________________________________________________________
> Windows Live Hotmail and Microsoft Office Outlook together at last. Get
it
> now.
>
http://office.microsoft.com/en-us/outlook/HA102225181033.aspx?pid=CL100626971
> 033
> _______________________________________________
> spitlist@cox.net
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
> Triumphs mailing list
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|