In a message dated 2/1/2008 11:46:47 P.M. Eastern Standard Time,
My Standard Triumph shop manual doesn't provide a value for this.
I first put a little teflon grease on the splines to reduce friction and
then I tightened mine down as hard as I could with the assembly held in a
I then tapped the arm down on the splines to make sure all was seated, and
then tightened again. Making sure the tab washer is tight against the nut
should do it.
69 TR6 CC26160L
60 TR3A TS74461LO
**************Biggest Grammy Award surprises of all time on AOL Music.
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register