I picked up a set of TR3/4 steel wheels that are in good condition but have
the requisite surface rust for 40 year old wheels.
1) What's the best way to go about bringing them back to life. Sand
blasting, wire brushing (drill/wire brush) or another method?
2) Is it best to powder coat these wheels or just paint and clear coat them?
Any links to other sites and any advice is much appreciated,
State College, PA
1966 TR4A CTC 73139 LO
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register