Should be the same bulb as the other dash lights. It doesn't seem like it
to look at the socket but it screws in just fine.
The socket doesn't actually have threads, just a dimple that engages the
threads on the bulb.
You might find it helpful to pull back on the blue/white wire a bit whilst
threading in the bulb, this will relieve the spring pressure against the
bottom of the bulb.
Geo
----- Original Message -----
From: "dorpaul" <dorpaul@bellsouth.net>
Subject: [TR] TR3's dimmer-indicator light
> I've done a little bit of searching at Moss' site and cannot find a bulb
> listed that will fit my TR3's dimmer-indicator light (located in the
> speedometer). A gauge illumnation bulb will not fit this thing's socket.
> I
> doubt a turn signal bulb will fit it?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|