I will be rebuilding my master cylinder and calipers soon on my six and I am
looking for a rubber grease to go on the seals. The tech article from the
Buckeye TR site recommends using red rubber grease. I have found that the Lotus
Parts people have 500 grams for $39. That is a little more than I need. When
I googled it, I came up with sites in the UK and New Zealand. I also found at
AllRaceOil.com some PBR Rubber Grease for $7.95 for a 17.5 gm tube. Is this
the same stuff?
Does anyone know of a supplier of red rubber grease or have any
recommendations of what I should use for the rebuild on my M/C?
Peter Schoppelry
'69 TR6
CC 26418L
**************It's Tax Time! Get tips, forms, and advice on AOL Money &
Finance. (http://money.aol.com/tax?NCID=aolprf00030000000001)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|