triumphs
[Top] [All Lists]

Re: [TR] [6pack] Synthetic Oil Engine Damage

To: DLylis@aol.com
Subject: Re: [TR] [6pack] Synthetic Oil Engine Damage
From: Robert Lang <lang@isis.mit.edu>
Date: Mon, 10 Mar 2008 11:52:57 -0400 (EDT)
On Sun, 9 Mar 2008 DLylis@aol.com wrote:

> In a message dated 3/9/2008 12:34:07 A.M. Eastern Standard Time,
> bratt@sasktel.net writes:
>
> A local  mechanic who runs an auto wreckers washes out the crud on resalable
> cars  by filling the sump with 15W40 Diesel Spec. oil, and running it for a
> few  hundred miles.  The extra detergents in the Diesel Oil wash out the
> accumulated crud and sludge.  I figured that would be pretty had on  the
> bearings and cylinder walls.
>
>
>
> What say the list?  Lots of LBC owners have switched to  Shell Rotella for
> the ZDDP.

Look carefully at the label. Rotella changed recently to a new spec, I 
think it's CL-4 or something like that. They have reduced the ZDDP in the 
Rotella too.

On the plus side, several oil companies have recently indicated that they 
will release motor oil products for gasoline engines that have higher 
levels of ZDDP - these will be marketied as racing oils...

If you can't wait, there's good products out there already. Most cater to 
the racing community (Like RedLine, Valvoline Racing and Brad Penn and 
others)

> David  Lylis
> 69 TR6 CC26160L
> 60 TR3A TS74461LO

rml
---------------------------------------------------------------------------
Bob Lang              NER/SCCA                 |  This space for rent
Solo Chair 2008       TR6 40 F Prepared        |  Triumph!
Voice:781-438-2568    FAX: 617-258-9535        |  Cell: 339-927-4489
---------------------------------------------------------------------------
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>