Sure. Apply 12 volts to the two terminals and the plunger should move.
The bottom off the valve (opposite the terminals) is open to the bottom of
the plunger. You can push it in with your finger to see it move. position the
valve where you can see it and apply 12 volts and you should see it should
pull in.
Dave
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|