In any case (if you have not already) you should measure to see what you
actually have. A lot of substitutions occured over the years when the
correct sizes were not on the local parts shelf. Don't assume that your
current ones are 'as original'.
Geo
----- Original Message -----
From: "dorpaul" <dorpaul@bellsouth.net>
To: "list Triumph" <triumphs@autox.team.net>
Sent: Friday, March 28, 2008 3:55 AM
Subject: [TR] Rear Wheel Cylinders
> List,
> For some reason, I hadn't realized that .75 bore Rear Wheel Cylinders are
> not
> available. If that is true,
> it looks like I'll need to order two .70 bores instead of just replacing
> the
> one that is the only one needed. Is this true?
>
> Thanks,
> Paul Dorsey
> 60 TR3A TS71318
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|