Well, I just received my TR3 manifold from Paeco.
I had the std gray jet coating applied.
Before I had this done, I had the local machine shop level off the flange and
ports and I grinded, filed off all the casting edges and finally a through
bead blast before shipping off to Paeco.
The manifold looks real nice, sort of a rough flat finish.
Anyone wants a photo just email me offline.
The list archives is really positive about this procedure. I hope it lasts.
Kind of pricey!
Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|