I thought you were referring to the close relationship that "W" has with the
oil industry! :)
Joe
-----Original Message-----
From: triumphs-bounces+spitlist=cox.net@autox.team.net
[mailto:triumphs-bounces+spitlist=cox.net@autox.team.net] On Behalf Of
FGFO1@aol.com
Sent: Monday, September 01, 2008 2:30 PM
To: triumphs@autox.team.net
Subject: [TR] TR3 oilite bush
Any one know what material the oilite bush is made from?
The oilite bush is the bronze colored bush that fits into the back of the
crank. The input shaft of the gearbox fits inside it.
While we are talking about it, I cant locate mine right now so does any one
have an accurate length for that bush?
Its either 1.000 to 1.160 or someplace in-between.
thanks
Frank Fisher
**************It's only a deal if it's where you want to go. Find your
travel
deal here.
(http://information.travel.aol.com/deals?ncid=aoltrv00050000000047)
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as spitlist@cox.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|