> Personally, I use Motorcycle fork since they too are a hydraulic type of
> shock. I don't remember though what the weight of the oil was.
>
> Mark
>
> Subject: [TR] tr-3 lever shocks
>
> I'm renewing the lever shocks on my tr-3 project. ...Also what fluid?
> I've heard various choices of oils.
I agree. Just go to your local cycle shop and ask for Harley Davidson Hydraulic
Fork Oil Type "B." I used it and have been driving for three years. ISR it's
20 weight. Shocks are much nicer on the '3 than on the old Datsun 2000
Roadster.
Hmmm...Was thinking today that the Triumph is considerably better built than
the Datsun Roadsters. Then again, I didn't do a ground up on the Datsun.
Terry Smith, '59 TR3A
New Hampshire
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|