triumphs
[Top] [All Lists]

Re: [TR] Rusty Panel treatment

To: v6spitfireguy@cox.net, triumphs@autox.team.net, Carl TR
Subject: Re: [TR] Rusty Panel treatment
From: William Brewer <wsb1960tr3a@att.net>
Date: Mon, 15 Sep 2008 07:32:14 -0700 (PDT)
     I don't think that this will be a problem. You may get lower current
because of the higher voltages. I would try it on a piece of scrap first.

     Bill in Tehachapi

--- On Mon, 9/15/08, Carl TR <cfmtr3a@verizon.net> wrote:
From: Carl TR <cfmtr3a@verizon.net>
Subject: Re: [TR] Rusty Panel treatment
To: wsb1960tr3a@att.net, v6spitfireguy@cox.net, triumphs@autox.team.net
Date: Monday, September 15, 2008, 6:15 AM

Not sure who originated this thread - but I came across a 36volt battery
charger at a garage sale. (Golf cart charger) and since the price was right
($2) I immediately thought of this tank.  I have a 55 gal plastic drum so
the only part I don't have is the wire mesh but that isn't a problem.
Is
there an issue with using the 36v instead of a standard battery charger?


----- Original Message -----
From: "William Brewer" <wsb1960tr3a@att.net>
To: <v6spitfireguy@cox.net>; <triumphs@autox.team.net>
Sent: Tuesday, August 26, 2008 12:54 AM
Subject: [TR] Rusty Panel treatment


>     I have a friend and we made a derusting tank off of info we found on
> the net. It took a plastic tank full of baking soda solution. The tank was

> lined with steel mesh (an old bird cage ISTR). The part in question hangs
> in the tank by a steel wire, not touching the steel mesh. Then we hooked
> up a battery charger with one lead to the steel wire supporting the part
> and the other on the steel mesh. The part would bubble slowly and after a
> few hours the part comes out shiney clean and bright. It doesn't eat
the
> metal away at all, unless you hook the leads up backwards. We experimented

> on old rusty horse shoes first. You can probably still find the info with
> a Google search.
>     Here is a link:
> http://www.stovebolt.com/techtips/rust/electrolytic_derusting.htm
>     or
>     http://www.rowand.net/Shop/Tools/Electrolysis.htm
>
>     Good luck.
>
>     Bill Brewer
>     Tehachapi, CA
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as cfmtr3a@verizon.net
>
> http://www.team.net/archive
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>