> Where should I look next?
When mine did that, it turned out to be one of the connectors to the
solenoid. They wouldn't pull off, but were just a bit loose when installed.
Pinched both of them a bit tighter with pliers, reinstalled, and the problem
went away.
But of course there are lots of other places it could be.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|