triumphs
[Top] [All Lists]

Re: [TR] body to sill fit

To: "'Gary Nafziger'" <nafzigerg@yahoo.com>, <triumphs@autox.team.net>
Subject: Re: [TR] body to sill fit
From: "Andrew Uprichard" <auprichard@comcast.net>
Date: Fri, 31 Oct 2008 15:41:46 -0400
Gary:

My first restoration did not require replacing sills but my current one did.
I kept the body on the frame until I had replaced sills and floors but even
then nothing fitted!  My only advice is to ensure the A and B posts are OK
so that the door gaps are good, and after that you have more latitude to
"fudge and budge".

Andrew Uprichard

-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Gary Nafziger
Sent: Friday, October 31, 2008 12:21 PM
To: triumphs@autox.team.net
Subject: [TR] body to sill fit

frame up restore on tr-3
I have my body tub split into two pieces while i work
on replacing rusted out places on each clip.  just received a new left sill
(right one back ordered) mounted it and tentatively fit the front clip.
Looks
like rear of front clip fits ok to sill but farther forward fit is around
3/8th off.  tentatively measuring things it looks like the other side will
also be off over an inch.  

my question is to anyone who has done a body
off.  does the body fit down on sills?  how did your body fit?  is there
lots
of fudging/budging to do? lol

thanks!  
gary n.
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

You are subscribed as auprichard@comcast.net

http://www.team.net/archive
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>