I am back to finishing the wiring of my '59 TR3A. Do you run a ground wire
for each turn signal light (the round red lights on the tail) and do you run
the ground to the screw holding the socket to the body? Also, for the
tail/brake lights, do you run the ground wire only for the left rear light
and again, to the mounting screw? The turn signals are not in series so it
would seem they need to be grounded, while the tail lights/brake lights seem
to be in series. Thanks.
Scott Suhring
Mechanicsburg, PA
'70 TR6
'59 TR3
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|