triumphs
[Top] [All Lists]

Re: [TR] frame paint

To: FRED E THOMAS <frede.thomas2@verizon.net>
Subject: Re: [TR] frame paint
From: Michael <tr3a@comcast.net>
Date: Mon, 15 Dec 2008 18:07:47 -0500
   Now THERE'S a shock! Fred, I heard you PC'd your TIRES!!
   FRED E THOMAS wrote:

     Coil springs as well as leaf springs are P/Ced,  "FT"
     ===================================================================
     =====================================
     ----- Original Message ----- From: "Randall" <tr3driver@ca.rr.com>
     To: <triumphs@autox.team.net>
     Sent: Monday, December 15, 2008 1:15 PM
     Subject: Re: [TR] frame paint

     His job was to
     carefully
      paint the entire underside of the car and the inside of the fender
     wells
     using  all the used motor oil.

     Including  the  rear  springs no doubt, as per the factory workshop
     manual!
     One  of  the  few  areas where the factory automatic system doesn't
     cover very
     well.
     Randall
     _______________________________________________
     Support Team.Net  http://www.team.net/donate.html
     This list supported in part by the Vintage Triumph Register
     http://www.vtr.org
     Triumphs@autox.team.net
     http://autox.team.net/mailman/listinfo/triumphs
     You are subscribed as frede.thomas2@verizon.net
     http://www.team.net/archive

     _______________________________________________
     Support Team.Net  http://www.team.net/donate.html
     This list supported in part by the Vintage Triumph Register
     http://www.vtr.org
     Triumphs@autox.team.net
     http://autox.team.net/mailman/listinfo/triumphs
     You are subscribed as tr3a@comcast.net
     http://www.team.net/archive
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>