Yes I do have roller rockers. Is this a common problem with them? I had
an aftermarket aluminium valve cover on for a while but it shed oil
even quicker than the factory cover , so I put the factory cover back
on since it has an internal baffle. There is a hose that goes from the
valve cover to the canister that holds two filters. The hose is not
centered and is much closer to one of the filters than the other. This
is the filter that is being coated with oil. Should I put in an oil
separator from Goodparts to correct this or is there something else
that I can do? Is this normal?
Quoting Craig <firstname.lastname@example.org>:
> John do a leak down test. This way you will know what problem really is and
> how to fix it.
> I it running roller rockers if not how do you get oil all over the air
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register