So my nice little project to do a narrow belt conversion has taken a
sideways turn. As the rad was out I thought that I would take out some play
in the inner tie rod ball joints, so out came the rack.
I did this 30+ years ago and discovered that I had over shimmed it when the
rod broke; most inconvenient when miles from home. So does anyone know:
- what the shim procedure is?
- what wear points elsewhere in the rack will make the difference between
worn and worn out?
Thanks
--
Ian
62 TR4
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|