John,
According to the TRA Judging guide: "...clear cadmium plated seat slide
assemblies......the lock release level assembley mounted on the outboard
slide" I don't find any notations of changes through various production
years.
All the best,
Bill B
'58 TR-3A TS/30766 L
'59 TR-3A TS/64974 LO
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of John Gillis
Sent: Saturday, April 11, 2009 3:55 AM
To: Triumph List
Subject: [TR] TR2 seat rails
Hello all- I bought my seat rails off E-Bay in a box as I had none to speak
of. I managed to figure out how it all goes together except for which side
the rail with the adjustment lever goes, is it inside, i.e gearbox tunnel
side or outside, i.e door side?.
Thanks in advance
John
1954 TR2 (long door)
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as wbeech@flash.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|