Hi,
I am replacing the door windows in a TR250.
The biggest problem I am having is trying to get the door panels back
on. Trying to line up all those clips with the holes in door is just
about driving me crazy. I decided that not all of the clips are really
needed - but that doesn't help a lot. It seems every clip has to be
positioned totally different than the one next to it.
Has anyone come up with a tick that makes this easier? I know this is
probably crossing the line, but if I could find velcro with a low enough
profile, I would probably use that. Unfortunately, all that I have seen
would make the door panel stick out too far.
Any suggestions?
Thanks,
Roger Elliott
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|