triumphs
[Top] [All Lists]

[TR] Breather for TR3 Alloy Valve Cover

To: triumphs@autox.team.net
Subject: [TR] Breather for TR3 Alloy Valve Cover
From: DLylis@aol.com
Date: Wed, 22 Apr 2009 18:15:10 EDT
As I posted earlier I installed an alloy valve cover with the non breather  
cap, and discussed the resulting oil coming from the lower breather  tube.  
I have solved the problem (maybe) by getting a 3/4" washer  that is 2" in 
diameter and soldering a 1 1/2" OD chrome over brass tail  piece from a sink. 
 There is grinding and fitting to get it just right, and  I have yet to 
make the rubber gasket, but check out the pics.  Yes,  there is enough bonnet 
clearance and now I have a breather cap.
 
 _http://i215.photobucket.com/albums/cc88/TRG69/P4220375.jpg_ 
(http://i215.photobucket.com/albums/cc88/TRG69/P4220375.jpg) 
_http://i215.photobucket.com/albums/cc88/TRG69/P4220376.jpg_ 
(http://i215.photobucket.com/albums/cc88/TRG69/P4220376.jpg)  
 
It is not yet in service as I am rebushing my rockers.  More to  come.
 
David  Lylis
69 TR6 CC26160L
60 TR3A TS74461LO
**************Big savings on Dell XPS Laptops and Desktops! 
(http://pr.atwola.com/promoclk/100126575x1220433404x1201394533/aol?redir=http:%2F%2Fad.doubl
eclick.net%2Fclk%3B214133109%3B36002181%3Bk)
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>