> or just paint and
> use tap to clean later? any ideas would help!
I have found it advisable to chase the threads anyway, even when not
painting; so my advice is paint & tap.
But I use an old, rather worn tap ... which got that way chasing TR3 caged
nuts <G> Being somewhat lazy, in most cases I use an air ratchet to drive
the tap in & out.
Some anti-seize on the bolt threads will make future disassembly much
easier, too.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|