this would be a good time to be an armateur . . .
----- Original Message -----
From: "dorpaul" <dorpaul@bellsouth.net>
To: <terryrs@comcast.net>; "Geo Hahn" <ahwahnee18@gmail.com>
Cc: <triumphs@autox.team.net>
Sent: Thursday, May 14, 2009 8:18 PM
Subject: Re: [TR] Horn Problem
> Terry,
> I'm waiting to work on my mounted TR3 horns until I install a permanent
> battery. Until then, I am concerned about sufficient current. Then I'll
> also know other systems are working; I'm such an amatuer!
>
> Thanks, Paul
>
>
> ----- Original Message -----
> From: <terryrs@comcast.net>
> To: "Geo Hahn" <ahwahnee18@gmail.com>
> Cc: <triumphs@autox.team.net>
> Sent: Thursday, May 14, 2009 7:24 PM
> Subject: Re: [TR] Horn Problem
>
>
>> >I would certainly offer a ground to the horns and confirm they work. B
>> >Then
>>>check the ground created by the horn wire coming out of the bottom of the
>>>stator tube. B I would save pulling the tube for a last step when all
>>>else
>>>checks out fine.
>>
>>
>> Thanks, Geo.B I had a similar thought last night, wondering how I could
>> have
>> been such an idiot as toB not have thought of it earlier.B Did
>> disconnect the
>> ground wire and touch it to ground.B Same problem.B
>>
>>
>>
>> Don't have to pull the Control Head!B Whoo Hoo!.B So now it's all about
>> taking the horns out, attaching them to a battery charger, and doing an
>> adjustment until I'm satisfied.
>>
>>
>>
>> Terry
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|