Thanks Randall, that's probably the easiest way to go. I was thinking in
terms of a check valve in the line or something. The cap is not vented at
----- Original Message -----
From: "Randall" <firstname.lastname@example.org>
To: "'Triumph List'" <email@example.com>
Sent: Monday, August 10, 2009 9:31 PM
Subject: Re: [TR] TR3A gas tank vent pipe question
>> Is there any type of check valve that is supposed to be in the banjo
>> on the TR3A gas tank vent pipe? Or is there supposed to be something
>> the tank to prevent gas from pouring out on corners?
> To the best of my knowledge, no.
>> Anyone else have this problem and come up with a
> My solution was to simply cap off the vent line (or you could remove it
> put a short plain bolt and washer in the hole). My car had a small vent
> hole in the fuel cap (through the inner plate that actually covers the
> opening to the tank); but if not, it would be easy enough to add one.
> Support Team.Net http://www.team.net/donate.html
> This list supported in part by the Vintage Triumph Register
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register