I agree. I have a mild cam in my 3A and although I do not look at the tach when
launching, close to 2000 would not surprise me.
------Original Message------
From: Randall
Sender: triumphs-bounces@autox.team.net
To: triumphs@autox.team.net
Subject: Re: [TR] mild cam addition
Sent: Aug 13, 2009 7:11 PM
> No way a mild street cam should require
> 2000rpm to launch unless you're going up a very steep incline
> and your flywheel is significantly lightened.
I was running a Fidanza alloy flywheel with a stock cam; and 2000 rpm sounds
reasonable to me even on a flat road.
It can be done somewhat lower, if you are very good at synchronizing the
clutch release with the throttle application ... But I'm not that good, at
least not every time.
-- Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
Sent via BlackBerry by AT&T
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|