triumphs
[Top] [All Lists]

Re: [TR] Wiper motor mounting

To: "'Ed Woods'" <fogbro1@comcast.net>, <triumphs@autox.team.net>
Subject: Re: [TR] Wiper motor mounting
From: "Andrew Uprichard" <auprichard@comcast.net>
Date: Fri, 4 Sep 2009 07:13:02 -0400
I had exactly the same problem with a newly-restored TR3.  Since I don't
intend to be out much in the rain and hence won't be pushing the limits of
endurance of the wiper motor, I gave up and used rubber washers on either
side of the plate.

Andrew Uprichard

-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Ed Woods
Sent: Thursday, September 03, 2009 8:19 PM
To: triumphs@autox.team.net
Subject: [TR] Wiper motor mounting

List,

I've purchased a new wiper motor mounting kit which, of course, includes the
three rubber bushings that are supposed to occupy the three holes in the
steel
plate under the wiper motor. Same kit for TR3, 4, 250, 6 and probably
others.
Back in the days of Lucas and Lucas parts I can recall installing these
bushings w/o a whole lot of cussing. Well, today, the air was blue, but to
no
avail. All I managed to do was to scratch some new paintwork.

Has anyone on the list installed these bushings recently (recently as in non
Lucas)? What's the secret to installing them with a minimum of damage to
paint, tools and as little blood as possible?

TIA,

Ed Woods
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>