triumphs
[Top] [All Lists]

Re: [TR] TR Servo Rebuilder - Diaphragm source

To: triumphs@autox.team.net
Subject: Re: [TR] TR Servo Rebuilder - Diaphragm source
From: Chad <triumph74tr6@yahoo.com>
Date: Mon, 21 Sep 2009 20:47:12 -0700 (PDT)
I've heard that the diaphragm for '65 - '66 Mustangs can be used.  These can
be had from good Mustang parts suppliers.

Chad in Tulsa

Message: 5
Date:
Mon, 21 Sep 2009 23:10:45 +0000 (UTC)
From: stantr6@comcast.net
Subject: Re:
[TR] TR Servo Rebuilder - Diaphragm source
To: Triumph List
<triumphs@autox.team.net>
Message-ID:
   
<1502388774.5441261253574645245.JavaMail.root@sz0153a.westchester.pa.mail.com
cast.net>
    
Content-Type: text/plain; charset="us-ascii"

List, 
Does
anyone out there know where I can purchase a diaphragm for a TR6 brake servo ?
Years ago, I came across two old units, plus the one on my '74 TR6, that I was
restoring. 
I opened all three, discovered my original was torn, apparently at
manufacture. I replaced it with the better of the other two diaphragms, had
best can powdercoated (kept mating surfaces bare), replaced the other
components with new, from TRF, and reassembled. 

Now, I would like to
assemble another, but rubber diaphragms seem to be a controlled substance.
thanx, 
Stan
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>