Geo,
I am have some issues too with my newly installed, self-rebuilt wiper motor.
How can you know the difference and how to deal with it?
Bill
Bill Beecher
'58 TR-3A TS/30766 L (On the road in 2009!)
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Geo Hahn
Sent: Tuesday, September 22, 2009 6:35 PM
To: L1J1S@aol.com
Cc: triumphs@autox.team.net
Subject: Re: [TR] tr- tr3 wiper motor
You'll want to be double-darn sure you are wiring it correctly. The scheme
changed over the years to a switched ground and many wiring diagrams will be
incorrect for your car.
Geo
On 9/21/09, L1J1S@aol.com <L1J1S@aol.com> wrote:
> hello, well i tried to hook up my wiper motor today and all i got was
> a small mist of smoke out of it. everything electrical is hooked up to
> the tr3-a except the three black wires for the wiper motor. i don't
> understand what happened to the motor. i did have it powder coated by
> great powder coater himself "FT". the motor then has been sitting
> around for a few years ever since. i want to keep the outer shell and
> would like to rebuild the one i have. does anyone have one they can
> spare? larry schwartz
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|