triumphs
[Top] [All Lists]

Re: [TR] Tr 3 Transmission

To: Mark J Bradakis <mark@bradakis.com>
Subject: Re: [TR] Tr 3 Transmission
From: Bob Wanderer <rawanderer@comcast.net>
Date: Mon, 1 Mar 2010 13:21:17 +0000 (UTC)
If you spell check "tranny" it will change it to "tyranny"

BobW

Montgomeryville, PA

1974 TR6


----- Original Message -----
From: "Mark J Bradakis" <mark@bradakis.com>
To: triumphs@autox.team.net
Sent: Sunday, February 28, 2010 10:01:16 PM GMT -05:00 US/Canada Eastern
Subject: Re: [TR] Tr 3 Transmission

bielings wrote:
> B the tyranny of my TR 3
Interesting typo ;-)

By circlip remover are you referring to the fairly wimpy ones on the
big bearings? B If so, tools for that can be found at many parts stores,
hardware stores, etc.

If you are talking about that big ol' monster that holds the 2nd gear
cluster in place on the mainshaft, that's different. B Many years ago I
purchased the repro of the Churchill tool for that from TRF, and have
used it quite a few times. B Still, that thing is a pain to remove and
install.

You might consider purchasing an extra circlip, it is possible to fracture
the new one during installation and having a second one handy means the
gearbox won't be sitting on a bench for days waiting for the new one to
arrive.

mjb.

_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation B $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/triumphs/rawanderer@comcast.net

_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>