And remember, even if you are not a perfectionist... Neither was the guy at
Coventry who did it the first time, while the numbers on my original plate
are straight they are not on the line.
Bill
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Carl TR
Sent: Sunday, March 14, 2010 11:50 AM
To: triumph list
Subject: Re: [TR] Punch Set
Harbor Freight has them in the $8-9 (less if on sale) range. Online at
harborfreight.com search on number punch.
I'm sure some of the other tool sources has them as well.
Carl
----- Original Message -----
From: "TeriAnn J. Wakeman" <tjwakeman@gmail.com>
To: "triumph list" <triumphs@autox.team.net>
Sent: Sunday, March 14, 2010 1:12 PM
Subject: Re: [TR] Punch Set
> Jim wrote:
>> I had mine done at a local machine shop.
>>
>
> I just purchased the 1/8th inch punches I needed, clamped down the plate
> with a straight edge and used the straight edge to align the punches as I
> punched in the number myself.
>
> No big deal and punches are cheap.
>
> Teriann
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|