Oh... and I have seen a 'make your own cable kit' in the HELP section
of the FLAPS. Comes I think with the inner cable and some parts to
make the ends. Haven't tried it but might work for you.
On 3/22/10, Geo Hahn <email@example.com> wrote:
> On 3/22/10, Ed Oot <firstname.lastname@example.org> wrote:
>> ..the short cable that goes from the EGR meter to the speedo was broken.
> Ed -- I have used a local shop that does instrument repair that makes
> replacement inner cables while I wait. They match the fixed end, cut
> to length and then use some special tool (maybe a hammer) to make the
> squared end.
> You might check the yellow pages and see if there is one of these
> places in your world.
Suggested annual donation $11.47