I found this Site about an hour ago. I wrote some prefixes down and I'm
From: "Roger Elliott" <firstname.lastname@example.org>
Sent: Tuesday, April 13, 2010 5:13 PM
To: "Wayne Lee" <email@example.com>
Subject: Re: [TR] Identifying Mk III Engine Block Externally
> Hi Wayne,
> Here is a web site with engine prefix by model
> -----Original Message-----
>>From: Wayne Lee <firstname.lastname@example.org>
>>Sent: Apr 13, 2010 2:56 PM
>>To: Triumph List <Triumphs@autox.team.net>
>>Subject: [TR] Identifying Mk III Engine Block Externally
>> I'm going down after work with my Van to pick up some loose Bits from
>>the Garage where the 69 Spitfire Mk III is located . The Engine was
>>past and until I pull the Sump Pan and look at what I have, How can I tell
>>Engine is a Mk III or the later, larger Bearing Sized example by looking
>>by having some Casting #'s to go by. I seen a single Carb Manifold amongst
>>and I'm hoping it didn't come off of this Engine.
>> He has 2 Trannies and an extra Diff., so there's hope it's a Mk III if
>>picked up the rest
>>of the pieces from another Collection. In the meantime, I'll be anxious to
>>identify it, when I get there.
>>Any help appreciated. I won't be leaving for another 2 1/2 hrs.
Suggested annual donation $11.47