First you might try replacing the compression olive, if you can get
the old one off without damaging the pipe. Otherwise the inlet is
5/16" pipe and standard stuff at the auto store. The outlet pipe is
the special one that is hard to find.
> Subject: [TR] Inlet rigid fuel line to fuel pump 66 TR4A
>
>
> I'm looking to replace the inlet rigid fuel line which goes into
> the inlet
> side of the fuel pump.. I am getting a slow leak by the compression
> fitting I
> suspect. When researching to source a replacement with the usual
> suspects I
> see it is no longer available. Anybody aware where I could get this
> part. In
> researching the archives I see others have had a problem with
> length of the
> compression beads?
>
> Any help would be appreciated.
>
> Thank you
>
> Peter
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|