> I am attempting to tighten the tie-rod ends to the steering arm on the
> suspension.
> After a while, the nut gets just tight enough to start turning the ball
inside
> the ball joint, preventing me from getting any real torque.
>
> What the trick for stopping the ball from spinning?
First use a plain nut to tighten the taper into the arm. Then remove the plain
nut and install the fibre lock nut.
John H.
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|