Bob:
Thanks. i talked to a painter buddy of mine and he also recommended
denatured alcohol as the mineral spirits can leave a residue.
Jim henningsen
----- Original Message -----
From: "Bob" <yellowtr@adelphia.net>
To: <triumphs@autox.team.net>
Cc: "James Henningsen" <trguy@cfl.rr.com>; "Joe Curry" <spitlist@cox.net>
Sent: Thursday, July 01, 2010 8:02 AM
Subject: Re: [TR] Clutch Master
> On Wednesday, June 30, 2010 10:27:39 pm James Henningsen wrote:
>> Mineral spirits sound like a good plan. There was a lot of solid matter
>> in
>> the master from sitting so long and I want to make sure it gets cleaned
>> out before pumping the silicon through.
>> Thanks, jim
>>
>>
> Jim,
>
> I use alcohol and brake cleaner + compressed air not mineral spirits.
>
> I don't want any residue from the spirits to get to the seals etc.
>
> You can get cans of break parts cleaner from auto parts stores which
> remove
> gunk etc. They have the small red hose on the nozzle that forces a high
> pressure stream into the hose like on a WD-40 can.
>
> Just my 2 cents worth.
>
> Bob
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|