triumphs
[Top] [All Lists]

[TR] Fwd: [Wedge] temp guage moving when lights turned on

To: triumphs@autox.team.net
Subject: [TR] Fwd: [Wedge] temp guage moving when lights turned on
From: Dave1massey@cs.com
Date: Sat, 3 Jul 2010 22:14:07 EDT
This came to me but I think it was intended for the list.  Dave
Return-Path: <jat1127@hotmail.com>
Received: from mtain-de04.r1000.mx.aol.com (mtain-de04.r1000.mx.aol.com
  [172.29.64.204]) by air-df03.mail.aol.com (v129.4) with ESMTP id
  MAILINDF031-5eea4c2fe794347; Sat, 03 Jul 2010 21:44:52 -0400
Received: from snt0-omc4-s39.snt0.hotmail.com
  (snt0-omc4-s39.snt0.hotmail.com [65.54.51.90]) by
  mtain-de04.r1000.mx.aol.com (Internet Inbound) with ESMTP id
  10F5038000111 for <dave1massey@cs.com>; Sat,  3 Jul 2010 21:44:52
  -0400 (EDT)
Received: from SNT141-W47 ([65.55.90.200]) by
  snt0-omc4-s39.snt0.hotmail.com with Microsoft SMTPSVC(6.0.3790.4675);
  Sat, 3 Jul 2010 18:44:51 -0700
Message-ID: <SNT141-w47CEB09272746DAF44CE14B5B00@phx.gbl>
Content-Type: text/plain; charset="us-ascii"
X-Originating-IP: [71.235.163.40]
From: john taylor <jat1127@hotmail.com>
To: <dave1massey@cs.com>
Subject: RE: [Wedge] temp guage moving when lights turned on
Date: Sat, 3 Jul 2010 21:44:51 -0400
Importance: Normal
In-Reply-To: <6f320.50968403.3960f31e@cs.com>
References: <6f320.50968403.3960f31e@cs.com>
MIME-Version: 1.0
X-OriginalArrivalTime: 04 Jul 2010 01:44:51.0661 (UTC)
  FILETIME=[7E8F47D0:01CB1B1A]
x-aol-global-disposition: G
x-aol-sid: 3039ac1d40cc4c2fe7947f50
X-AOL-IP: 65.54.51.90
X-AOL-SPF: domain : hotmail.com SPF : pass
X-Mailer: Unknown (No Version)
X-Converted-To-Plain-Text: from multipart/alternative by demime 1.01d
X-Converted-To-Plain-Text: Alternative section used was text/plain

Hey,
 IMHO the very first thing to do is R&R the motor grounds. If the car has the
original braided strap it really needs to be replaced. I put a new ground on
each side of the motor and this problem went away and the motor started
better.

CHEERS
John

John Taylor
Greenfield, Ma
Gloucester, Ma
USA.

* ALWAYS BE SAFE *

Life is not a race.....you do not want to finish first.






> From: Dave1massey@cs.com
> Date: Sat, 3 Jul 2010 16:10:06 -0400
> Subject: Re: [Wedge] temp guage moving when lights turned on
> To: tr8@mercury.lcs.mit.edu
>
> In a message dated 7/3/2010 12:33:46 PM Central Daylight Time,
> dan@thecarringtons.net writes:
> > An additional enhancement for this problem, is to add another ground path
> >
> > to the flexi circuit board behind the gauges.  Find a place where you can
> > add a wire on the ground path of this circuit board, but remember, you
> > can't solder to it!  It will melt!  (Sorry, I don't remember where I put
> > my
> > ground wire....)
> >
> >
>
> One of the two screws for the volt meter is gound.  But the other one is
> +12 volts and grounding that one will only make things worse so take great
> care in selecting the proper screw.
>
> Dave
> --
> Forwarded via the TR7/8 mailing list. Please send administrative requests
> to the majordomo at tr8-request@mercury.lcs.mit.edu

_________________________________________________________________
The New Busy is not the old busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL
:en-US:WM_HMP:042010_3=

_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>
  • [TR] Fwd: [Wedge] temp guage moving when lights turned on, Dave1massey <=