I drove my TR3 for years without the 3 rear cappings. I finally located a
set, and straightened, covered and fitted them. Imagine my dismay when I
discovered that my tonneau, hood set stick cover and hood would no longer
fit.
Bob
TS57799L
----- Original Message -----
From: <wbeech@flash.net>
To: "'Gary Nafziger'" <nafzigerg@yahoo.com>; <triumphs@autox.team.net>
Sent: Sunday, July 25, 2010 11:22 AM
Subject: Re: [TR] tr-3 elbow/cockpit capping pieces
> Gary,
> You will need both the metal capping and the covering kits. The only
> place
> there is padding is on the doors, that you already have, the rest of the
> pieces are just put on directly to the metal with contact cement.
>
> BTW, if you are going to do this yourself be sure to take you time a
> dry-fit
> everything first.
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|