I have also had good luck with "universal fit" shims. Really easy to add,
and alot cheaper than new pads!
-Mark
On Fri, Aug 6, 2010 at 10:26 AM, Randall <tr3driver@ca.rr.com> wrote:
> > Are there shims available for this application?
>
> I don't have the part number handy, but my FLAPS carries "universal fit"
> shims that worked well for me when I had a problem on the TR. These are
> just rectangles of soft aluminum with adhesive on the back; cut them to
> shape with scissors (preferably the shop scissors, not your wife's good
> sewing scissors) and stick them on the back of the pads.
>
> They worked for me after most of the other standard solutions (including
> replacing the springs, deglazing the rotors, beveling the pads, goop on
> back
> of pads, goop on front of pads, etc.) had failed.
>
> -- Randall
>
> _______________________________________________
> Triumphs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/triumphs/markvaden@gmail.com
>
>
--
Never miss a moment again...
www.video-replay.com
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|