Hi Angelo;
Here's what the TR Register in Australia has to say about that:
"This trick makes it a little easier to remove & fit the bottom radiator
bolts. Cut a screwdriver slot in the threaded end of the machine screw. Once
it is loosened with a spanner , it can be removed & replaced with a
screwdriver. Tighten finally with a spanner. Use anti-seize on the thread to
keep
it free to turn."
Tim
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|