triumphs
[Top] [All Lists]

Re: [TR] Proper fill on a Triumph TR6 brake master res.

To: triumphs@autox.team.net
Subject: Re: [TR] Proper fill on a Triumph TR6 brake master res.
From: Bob <yellowtr@adelphia.net>
Date: Sat, 23 Oct 2010 11:16:59 -0400
On Friday, October 22, 2010 07:57:39 pm thenicholls@verizon.net wrote:
> List,
> 
> You have heard my story  about my brake system repair.
> 
> The shop put a new cap on the reservoir, and thought that was it.
> 
> So, easy question that is not stated in the maint. manual, how full should
> the reservoir be on a topped on newly bled system on the TR6.  How far
> from the top lip should the fluid be, and if over that height, it would be
> "to full".
> 
> Thanks,
> 
> Craig
> 1972 Triumph TR6
> 
Craig,

According to the TR6 handbook on page 58 the fluid level should never go below 
the danger line. As pictured it is where the top oval portion of the reservoir 
meets the lower straight portion. So I would guess that any level above that 
is ok up to the bottom of the filler cap.

I just finished bleeding my 72 brakes and I left the fluid level to about 1/2 
below the lower cap.

Bob
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>